Category: Uncategorized

4 Steps to Making Good Steps

Most people take steps for granted—until they stumble on poorly built ones. Whether it’s in your front yard, garden, or multi-level deck, properly designed landscape steps are essential for comfort, safety, and style. Here are four key practices EarthWorm Landscape Design Co. follows to ensure your outdoor steps are both functional and flawless.

1. Avoid Common “Danger Shapes”

Poorly shaped steps cause countless falls. Here’s what to watch out for:

• The Single Step: Common on front sidewalks or multi-level decks, a lone step often disappears in daylight or shadows. It becomes a hidden hazard during Hallowe’en and other events. If you must have one, add extra lighting, a handrail, or our go-to solution: a gritty, light-colored strip of paint across the top riser.

• The Stage Step: Found on porches or decks, this step ends abruptly and lacks a handrail—making it invisible from above. Always ensure steps are full-width and well-lit.

• The Wedge Step: Stylish but risky. If the narrow end of a step is too sharp, there’s no room to land your foot safely. Ensure the inside tread is at least 12 inches wide to avoid slips.

2. Use the Ergonomic Formula

Proper step sizing isn’t just about looks—it’s about comfort. Use the ergonomic formula to guide your design:

(2 × Riser Height) + Tread Depth = 28 inches

This formula ensures that your garden stairs or patio steps feel natural underfoot, regardless of age or mobility level.

3. Keep Every Step Consistent

One of the most common trip hazards? A step that’s just slightly off in height—especially where stairs meet the ground.

Do the math and make all risers equal. If the ground has settled and caused a taller bottom step, regrade or reset it. Even half an inch of difference can throw off a person’s stride.

4. Know Your Building Codes

Before building stairs, check local regulations for:

Codes exist for a reason—they protect you and your guests from preventable accidents. And remember: in cold climates, steps are often safer than ramps, which can become slippery from frost.

At EarthWorm Landscape Design Co., we specialize in step design that blends safety, ergonomics, and visual appeal. The best outdoor stairs are the ones you never notice—because they feel so natural to use. Book your perfect landscape solution today!

This post first appeared on https://blog.renovationfind.com

Design a Great Firepit Party!

Nothing brings people together like a fire. Whether you’re hosting a backyard gathering or planning a rustic night under the stars, a well-designed firepit area can transform your landscape into an inviting retreat. Here’s how to create a firepit party setup that’s cozy, safe, and unforgettable.

1. Pick the Perfect Location

Do you want your firepit to be part of the main entertainment zone near the house, or should it be tucked into the woods for a more primal, campfire feel? This key decision will shape the design:

• A gas firepit on a stone patio near the house reduces smoke and offers cleaner, modern vibes.

• A wood-burning bonfire offers a rustic charm but should be placed safely away from structures.

2. Design for Safety and Flow

If your firepit is close to your home’s deck or outdoor living space, a hardscaped pathway makes it easier to access. For remote, woodsy firepits, informal access through gravel or stepping stones may feel more natural.

Follow these fire safety essentials:

• Position the firepit at least 10 feet from any structure

• Use Fire Smart plant selections for Alberta landscaping

• Check local bylaws before installing a permanent pit

3. Choose Comfortable Seating

Comfort is key! For patios, consider weather-resistant outdoor furniture with cushions that encourage long conversations. If you’re embracing the woods, try large boulders, a seating wall, or cured log stools. Avoid freshly cut wood for seating—it’s sticky and full of sap.

4. Create a Cozy Enclosure

Firepits feel best when partially enclosed. Frame your space with boulders, shrubs, or perennial garden beds, leaving one side open to encourage playful flow. Add a pergola, vented gazebo, or wind-blocking louvres for shelter and style.

Right-size your firepit patio:

5. Add Evening Magic

Great lighting turns a firepit area into a magical evening escape. Use string lights, up-lit trees, lanterns, and pathway markers to build ambiance. White flowers like moonflower or Evening Scented Stocks glow at night and release fragrance after dusk—an enchanting touch!

6. Include Comforts & Extras

A screened gazebo nearby lets you set out food without worry and offers a cozy nook for late-night snuggles. Don’t forget warm blankets, marshmallows, and your favorite playlist or cheesy sing-along songs.

At EarthWorm Landscape Design Co., we specialize in crafting personalized outdoor spaces for unforgettable gatherings. Book your perfect firepit design today!

This post first appeared on https://blog.renovationfind.com

Creating the perfect outdoor living space means designing with intention, style, and comfort. At EarthWorm Landscape Design Co., we believe your backyard should be a sanctuary—a space that feels like an extension of your home. Here are the four essential elements for building a truly enjoyable and functional space:

1. Furniture You Love

Whether it’s a snuggly sectional, a soothing lawn swing, or a rugged harvest table under string lights, the furniture you choose should invite you outside. Select pieces that reflect your style and provide the comfort you need to unwind. A storage trunk is a smart addition—keeping dry cushions and throws on hand means you’re always ready to relax in your backyard oasis.

2. Properly Sized Space

Choosing the right furniture is only half the equation—you also need a landscape design plan that accommodates everything comfortably. This is where a scale drawing becomes essential. Pull chairs out from the table, ensure space for movement even when seats are occupied, and leave enough room around the BBQ area. Add pots and baskets of summer flowers for colour and vibrancy.

Don’t forget: draw a 3-foot-wide garden path from the door to the exit or stairs, and keep it clear of furniture. Our average patio design spans at least 16 feet across, providing plenty of room for both functionality and flow. For a small nook for two, plan for at least 6’ by 8’.

3. Safety and Standards

Following proper construction standards results in an outdoor space that’s not just attractive but also safe. Nobody enjoys sitting beside a drop-off, navigating awkward stairs, or worrying about unsafe railings. Strategic dividers, walls, and railings add privacy, shelter, and decorative potential while ensuring peace of mind. Best of all, doing things right inspires your neighbours to do the same—keeping eyesores to a minimum.

4. Fill It With Life

To transform a good space into a great one, infuse it with life and sensory richness. Consider vines for privacy, herb planters for aroma and utility, and fountains to add the soothing sound of water. String lights can add ambience and charm.

The BBQ area often becomes the social hub, so keep it close to the seating area. You might even create a cozy bistro corner with cut flowers, a wine bottle display, and a bar-height table for casual dining. Add a few guests—and voila, instant magic!

At EarthWorm Landscape Design Co., we’re full of creative ideas to turn your backyard into a destination. Book your custom outdoor living solution today!

This post first appeared on https://blog.renovationfind.com

Homes often reflect the personality of their owners. When you stand at the curb looking at your home, do you feel happy and welcomed—or do you feel pushed away?

Whether you’re a public figure seeking privacy or an introvert looking for solitude, the right landscape design can help you create a serene and secluded outdoor space. With professional help, you can incorporate fences, hedges, privacy walls, and secure gates that send a clear message to “keep out.” Your front yard can be landscaped to feel set back from the street, with the entrance subtly hidden from view—an ideal approach for private homes.

On the other hand, if you prefer a welcoming and vibrant curb appeal, paint your door a bold, cheerful colour and keep trees and shrubs trimmed to offer better visibility. You can experiment with wider planting beds filled with colourful perennials that bloom in succession throughout the growing season. Not only does this improve visual interest, but it enhances your home’s outdoor living experience as well.

A comfortable, well-maintained walkway should be between 3 to 5 feet wide. A gently curving path—or one with an intentional jog—adds personality and flow. Spend some time driving through different neighbourhoods to observe the variety of effects!

To add architectural flair, consider placing an arbour or archway over your front sidewalk. Just ensure it’s at least 4 feet wide to avoid feeling cramped. If you add a gate beneath the arch, be aware that guests may assume there’s a dog in the yard—possibly slowing them down!

At EarthWorm Landscape Design Co., we specialize in customizing front yard landscaping solutions to match your personality and lifestyle. Whether you’re after privacy, curb appeal, or both, our landscape designers will help your home send the right message. Book your perfect garden solution today!

This post first appeared on https://blog.renovationfind.com

Planning to upgrade or build a new deck? With Edmonton’s harsh winters and dry summers, choosing the right decking material isn’t just about aesthetics—it’s about long-term durability. That’s why more homeowners are choosing composite decking Edmonton as their go-to solution.

This guide walks you through everything you need to know: what composite decking is, how much it costs, why it performs so well in Alberta’s climate, and how to get it installed properly.

A wide-angle image of a finished composite deck with outdoor furniture, greenery, and clear skies.

What Is Composite Decking?

Composite decking is a manufactured material made from a mix of recycled wood fibers, plastics, and binding agents. It mimics the look of real wood, but without the common downsides like splintering, rotting, or fading.

Common Types of Composite Decking:

• WPC (Wood-Plastic Composite): Made from sawdust and recycled plastics.
  
• MBC (Mineral-Based Composite): Lightweight, heat-resistant, and ultra-durable.
  
• PVC Decking: 100% plastic, perfect for moisture resistance and fade protection.
  

Each material type has its strengths, but all are designed to last longer and perform better than traditional wood—especially in Alberta’s extreme weather.

Close-up of composite decking boards stacked side by side in different colors and textures 

Why It’s a Great Fit for Edmonton’s Climate

Between heavy snowfalls, sudden thaws, summer heat, and year-round UV exposure, wood decks in Edmonton take a beating. Composite decking is built to handle it all—with far less maintenance.

Key Benefits:

• No sanding, sealing, or staining
  
• Resistant to cracking, warping, and rotting
  
• Fade-resistant and water-repellent
  
• Slip-resistant surfaces, even when wet
  
• Simple cleaning with just soap and water
  

Homeowners seeking composite decking Edmonton appreciate its performance year after year.

Cost: Is Composite Decking Worth the Investment?

While composite decking comes with a higher upfront cost than pressure-treated wood, it often ends up being more affordable in the long run. You save on staining, repairs, and board replacement—not to mention your time.

What Impacts the Cost:

• Type of composite material (WPC, MBC, PVC)
  
• Brand and finish
  
• Size and layout of your deck
  
• Professional installation and design features
  

CBS Alberta works with trusted Canadian suppliers to source high-quality composite materials and offers clear, competitive quotes, helping homeowners plan confidently and avoid unexpected costs.

Railings and Finishing Touches Matter

A durable deck is only as good as its details. Your railing system contributes to both safety and aesthetics. CBS Alberta offers deck railing installation in Edmonton with aluminum, glass, or composite-compatible systems that match your design and meet local code.

They also provide additional services:

• Waterproofing solutions
  
• Custom layout and framing
  

CBS Alberta installers working on a raised deck frame, installing composite boards and aluminum railings.

Where to Buy Composite Decking in Edmonton

Composite decking boards are available at most building supply retailers. But to get the most out of your investment, professional installation is key.

CBS Alberta offers deck construction services tailored to Edmonton homes, including:

• Material recommendations
  
• Custom design
  
• Code-compliant framing and railings
  
• Warranty-backed installation
  

Conclusion

Composite decking offers Edmonton homeowners a durable, low-maintenance, and weather-resistant option that outperforms traditional wood. It’s a smart investment for lasting beauty and functionality in any outdoor space.

Working with experienced local installers can save time, money, and future headaches. Take your time to compare materials, designs, and installation services to make the most of your outdoor space.

This post first appeared on https://blog.renovationfind.com

If your deck is leaking water into the space below or holding puddles every time it rains, it’s not just inconvenient, it’s a warning sign. In a city like Edmonton, where freeze-thaw cycles are common, unprotected decks can lead to rot, mold, and expensive repairs.

Luckily, professional waterproofing and drainage repair can solve these problems for good.

A flat deck surface with visible puddles of water after rain
 

Signs Your Deck Has a Waterproofing or Drainage Issue

You might notice:

• Water dripping from the underside after rain
  
• Pooled water that doesn’t drain properly
  
• Spongy or softened deck boards
  
• Water stains on walls or ceilings below
  
• Musty smell around your foundation
  

These signs suggest your deck’s slope or waterproofing system is failing.

Purpose: Shows how a leaking deck affects the areas below it, reinforcing the urgency.

What Causes Ponding or Leaking?

In most cases, the problem starts with:

• Poor deck slope – Water can’t drain properly if the surface isn’t angled.
  
• Old or damaged coatings – Cracked or worn waterproofing no longer keeps water out.
  
• Gaps in flashing or seams – Where water seeps in undetected.
  
• Wood absorption – Some untreated wood pulls in moisture like a sponge.
  

All of these can be fixed with deck sloping and drainage repair services.

How Edmonton Homeowners Are Fixing It

CBS Alberta uses proven systems like Flexstone deck waterproofing Edmonton to protect against water intrusion—plus structural corrections to ensure proper water flow off your deck.

What the process includes:

• On-site inspection and slope check
  
• Removal of damaged coatings or boards
  
• Substrate repair and drainage correction
  
• Seamless waterproof membrane installation
  
• Flashing and railing base sealing
  

Technicians applying Flexstone coating on a large deck with sloping adjustment visible.
 

Why Standing Water Is More Dangerous Than You Think

Even if your deck isn’t leaking yet, standing water is a warning sign.

• Leads to wood rot and hidden damage
  
• Creates slip hazards during freeze-thaw cycles
  
• Promotes mildew and algae
  
• Weakens surface coatings
  
• Adds unnecessary weight stress on the structure
  

Coating Options for More Than Just Decks

CBS Alberta also installs epoxy and outdoor surface coatings to protect garages, patios, and other exterior surfaces ensuring your entire property is ready for Edmonton’s climate.

Conclusion

Leaks and standing water aren’t just inconvenient they’re early warnings of deeper structural issues. With proper waterproofing, slope correction, and a quality membrane system, your deck can be restored to perform and look its best for years.

Contact CBS Alberta for deck sloping and drainage repair services or Flexstone deck waterproofing Edmonton, and protect your home before the next rainfall.

This post first appeared on https://blog.renovationfind.com

Decks in Edmonton take a beating. Between snowmelt, spring rain, and intense summer sun, traditional deck materials often warp, crack, or rot within a few years. That’s why many homeowners are choosing a more durable, low-maintenance option: professionally installed vinyl decking.

Vinyl decking systems provide a fully waterproof, walkable surface that protects the structure below. When installed correctly, they not only extend the life of your deck but also reduce ongoing maintenance. In this article, we’ll explain what vinyl decking is, why it performs well in Alberta’s climate, and what to expect from a professional installation.

What Is Vinyl Decking?

Vinyl decking is a PVC-based membrane that’s applied to the surface of a deck. Once installed, it creates a continuous, sealed layer that acts as both the walking surface and the waterproof barrier with no paint or sealant required.

It’s especially useful for:

• Elevated decks and balconies 
• Rooftop patios 
• Walkout basements 
• Any space where water protection is important 

Because vinyl decking is installed as a single, bonded membrane, it provides long-term moisture protection that coatings or traditional boards can’t match.

Why It Works Well in Edmonton

Edmonton’s extreme climate puts serious pressure on outdoor surfaces. Constant freeze-thaw cycles can cause materials to crack. Heavy snow leads to moisture buildup. UV rays fade or dry out exposed finishes.

Vinyl decking addresses all of these challenges:

• Fully waterproof once installed 
• Resistant to mold, rot, and mildew 
• UV stable, so it resists fading and cracking 
• No sanding, staining, or sealing required 

That’s why vinyl decking Edmonton projects are becoming more common not just for appearance, but for real long-term durability.

Installation Matters: Why Professional Help Makes a Difference

Installing vinyl decking is not a DIY job. It requires:

• Careful surface preparation 
• Slope correction for water drainage 
• Precision cutting and heat-welded seams 
• Code-compliant flashing and integration with railing posts 

CBS Alberta offers waterproof deck installation in Edmonton with trained crews who follow best practices to ensure every membrane is installed correctly the first time.

How Much Does Vinyl Decking Cost?

Vinyl decking systems are generally more expensive than traditional wood at first—but the long-term value is clear. You save on maintenance, repairs, and early replacement.

Factors that affect cost include:

• Total square footage 
• Deck height and framing condition 
• Custom railing integration 
• Complexity of the layout (e.g., stairs, posts, transitions) 

CBS Alberta provides clear, competitive quotes and can walk homeowners through every step of the process from tear-down and framing to the final waterproof surface.

Railings and Details: Completing the System

A vinyl deck isn’t complete without a safe, properly installed railing system. CBS Alberta offers a range of compatible options, including:

• Aluminum picket or glass railings 
• Fascia or surface-mounted posts 
• Privacy walls for side yards or balconies 

Because they manage both the deck structure and finishing details, CBS Alberta can ensure that everything meets local code and looks cohesive.

Working with Local Deck Experts

If you’re considering vinyl decking for your home, working with deck construction experts in Edmonton ensures you get results that last. With experience in local building codes, material behavior, and climate considerations, companies like CBS Alberta provide peace of mind along with professional-grade results.

Conclusion

Vinyl decking offers a reliable, low-maintenance way to protect outdoor living spaces in Edmonton’s challenging climate. While the material itself plays a role, the true performance comes down to installation quality.

For homeowners looking for long-term protection and a clean, finished look, professional vinyl decking installation is a smart investment. CBS Alberta has the experience, tools, and team to do it right from structural framing to final membrane sealing.

This post first appeared on https://blog.renovationfind.com

Planning a home renovation or new build in Edmonton? Choosing a local general contractor isn’t just convenient, it’s a smart move that helps your project run smoother, faster, and with fewer headaches. Whether you’re building a new deck, upgrading your railings, or managing a complete exterior overhaul, working with a local pro gives you a major advantage.

Knowledge of Edmonton’s Climate and Building Codes

Edmonton’s weather is no joke from freeze-thaw cycles to heavy snowfalls, these elements can take a toll on construction materials and timelines. A local contractor knows how to plan around weather-related delays and use climate-resistant materials like waterproof coatings, durable vinyl decking, and composite boards that hold up over time.

More importantly, local contractors are familiar with Edmonton’s building codes and permitting rules, which reduces the risk of project delays or rework due to code violations.

Streamlined Management of Trades and Services

When you hire a company like CBS Alberta, you get more than just a contractor you get a project manager who coordinates multiple trades, saving you the stress of managing everything on your own.

Some of the services they coordinate include:

This all-in-one approach speeds up the project timeline and ensures quality control across every phase.

Local Connections and Permitting Know-How

Local general contractors have established relationships with trusted suppliers and municipal permit offices. This means they can secure materials quickly and pull permits without unnecessary delays something out-of-town companies often struggle with.

Faster Response and Post-Project Support

If an issue arises after your project is complete such as an adjustment to railings or minor repairs you’ll want someone who can show up quickly. Hiring locally means your contractor is nearby, available, and invested in maintaining a good reputation in the Edmonton area.

Why CBS Alberta Is a Local Contractor You Can Count On

Based in Edmonton, CBS Alberta brings years of experience in general contracting for both residential and commercial clients. From custom deck and railing installations to metalwork and waterproof coatings, they’re known for delivering high-quality results tailored to Alberta’s climate.

Their strong community presence and in-house teams allow them to deliver projects with precision, accountability, and ongoing support.

Final Thoughts

Hiring a local Edmonton general contractor like CBS Alberta simplifies every stage of your project from planning and permitting to execution and follow-up. You’ll benefit from climate-specific expertise, a smoother workflow, and a faster response when it matters most.

Start your renovation or new build with confidence. Explore CBS Alberta’s full range of general contracting services  today and get a quote tailored to your vision.

This post first appeared on https://blog.renovationfind.com

Concrete is a go-to material for driveways, sidewalks, and patios because it’s durable and long-lasting. However, Alberta’s extreme weather patterns can still cause even well-laid concrete to crack, shift, or sink over time. These issues aren’t just cosmetic. Uneven concrete can become a tripping hazard or make your driveway difficult to navigate.

While replacing damaged concrete might seem like the obvious fix, it can be expensive, time-consuming, and disruptive. That’s where concrete lifting (also called slab jacking or polyurethane injection) comes in. It is a faster, more cost-effective solution to restore your concrete surfaces.

What Is Concrete Lifting?

Concrete lifting involves injecting a specialized polyurethane foam beneath your sunken or uneven concrete slabs. Contractors begin by drilling small holes into the surface. Then, using precision equipment, they inject the foam into the voids beneath the slab. As the foam expands, it raises the concrete back into place.

The foam hardens quickly, creating a strong, stable base that’s resistant to water and future erosion. The result? A smooth, level surface that looks like new. The best part is that it can be completed in just a few hours.

How We Chose the Best Concrete Lifting Companies in Sherwood Park

Choosing a contractor for concrete lifting should take some time and research, and we hope this list helps you. For this list, we focused on companies serving Sherwood Park with a solid reputation, extensive experience, and a commitment to customer satisfaction.

We prioritized contractors that specialize in polyurethane foam lifting, which is a fast, effective, and environmentally friendly method. Companies that also offer related services like crack repair, void filling, and soil stabilization stood out. We reviewed customer testimonials, response times, and transparency to ensure we were recommending trusted professionals.

Some of the companies listed here are also RenovationFind Certified, which means they’ve passed extensive background checks, are fully licensed and insured, and maintain a high standard of customer service. We also check legal and financial history to ensure ethical and sound business practices. That certification gives you extra peace of mind when choosing who to hire.

Whether you’re dealing with a sunken driveway, uneven steps, or shifting sidewalks, these Sherwood Park concrete lifting companies are known for delivering safe, durable, and cost-effective solutions.

In no particular order, here are our top picks for the best concrete lifting companies in Sherwood Park.

Website: https://tcbfoamsolutions.com/

Address: Sherwood Park, Edmonton and surrounding areas

Contact Details: (587) 337-3353

Years in Business: 

Business Hours:

Website: https://www.groundworks.ca/

Address: 1919 84th Ave, Edmonton, AB T6P 1K1

Contact Details: 1-587-407-2525

Years in Business: 9

Business Hours:

Groundworks Canada was formed through the collaboration of three well-established companies—Clarke Basement Systems, PolyLevel Alberta, and Doug Lacey’s Basement Systems in Calgary. Together, they’ve combined their strengths to offer specialized concrete repair and lifting solutions across the Edmonton region, including Sherwood Park.

Known for their commitment to innovation, quality workmanship, and customer satisfaction, Groundworks is a leading provider of concrete lifting using PolyRenewal™, an eco-conscious polyurethane foam solution that levels and stabilizes sunken concrete. Whether it’s a cracked driveway, sinking sidewalk, or uneven patio, their experienced team uses cutting-edge tools and proven techniques to restore surfaces quickly and effectively. They also offer foundation repair services, including basement waterproofing, crawlspace repairs and radon mitigation.

Key Services & Features

• Concrete lifting for driveways, sidewalks, patios, pool decks
• Eco-friendly PolyRenewal™ concrete lifting
• Foundation and concrete repairs
• Crawlspace repairs
• Basement waterproofing
• House lifting solutions
• Concrete services available in Calgary and Toronto locations

Customer Feedback

Mo answered all my questions and concerns during our consultation, and Josh, Ethan and Derek did an amazing job. We had large cracks and trip hazards in our garage pad, and the improvement surprised me. The team was very thorough and the clean up was better than when they started! I would definitely use their services again, but I doubt that I’ll have to.

– Jim, Google

Website: https://proliftconcrete.ca/

Address: PO Box 90036, Montalet Beaumont, AB T4X OC8

Contact Details: (780) 918-3305

Years in Business: 7

Business Hours:

Website: https://crconcretelifting.ca/

Address: 80 Portage Close #200, Sherwood Park, AB T8H 2R6

Contact Details: (780) 940-5976

Years in Business: 22

Business Hours:

CR Concrete Lifting has been providing expert concrete repair and levelling services across Sherwood Park for over 22 years. Using high-quality polyurethane foam and modern equipment, they deliver safe, long-lasting results that restore both the function and appearance of your concrete surfaces.

Whether you’re dealing with sunken driveways, sidewalks, garage floors, patios, or basement slabs, CR Concrete Lifting offers reliable and affordable solutions. Their experienced team is dedicated to maintaining your property’s appearance at its best with professional service and proven techniques. Contact them about your project!

Key Services & Features

• Concrete lifting for driveways, sidewalks, patios, pool decks
• Residential and commercial services
• Basement floors and repairs
• Concrete crack repair
• Void filling
• Soil stabilization

Customer Feedback

I would recommend CR Concrete Lifting to anyone needing this work done. From the estimate to completion, all staff were great to work with. The quote was far better than others I received, and was exactly the amount due. The staff that came to the site were friendly and efficient, and gave me several after care tips. My front steps look so much better!

– Dolci, Google

Website: https://meritconcrete.ca/

Address: 2887 Parsons Rd NW Unit 2, Edmonton, AB T6N 1A3

Contact Details: 780.218.7511

Years in Business: 15

Business Hours:

Merit Concrete Lifters are a top choice for concrete lifting in Sherwood Park and the Edmonton Area. Since 2010, they’ve provided quality concrete lifting services for residential properties, including basement floors and garage slabs. Additionally, they offer concrete lifting services for commercial clients. Their expert team uses top-end equipment for a safe and high-quality job every time.

Learn why so many homeowners in the Capital Region are choosing Merit Concrete Lifters for their sunken concrete. Contact them today!

Key Services & Features

• Concrete lifting for driveways, sidewalks, patios, pool decks
• Residential and commercial services
• Basement floors and garage pads
• Concrete crack repair
• Void filling
• Soil stabilization

Customer Feedback

I am very happy with the entire experience of having Merit Concrete fix my sunken driveway. They were very responsive and accommodating. The job was done quickly and efficiently. The work was done very neatly with no mess and all of the employees were friendly and helpful.
I would recommed them highly to anyone with a concrete issue. I am adding a before and after photo.

– Judy, RenovationFind

Why Choose Concrete Lifting in Sherwood Park?

Here are a few key benefits of foam-based concrete lifting:

Cost Savings: Replacing concrete can be expensive, especially if you have to remove and dispose of an old concrete driveway. Concrete lifting uses fewer materials and less labour, making it a more budget-friendly repair option.

Quick Turnaround: Unlike full replacement, which can take several days, concrete lifting is often completed in a single visit. The area can be ready to use in as little as 15 minutes after the foam sets.

Strong & Lasting Results: Foam lifting not only levels your concrete but also stabilizes the ground beneath it, helping prevent future issues. If you don’t fix any erosion problems, your concrete can shift again.

Better Than Mudjacking: While mudjacking is another lifting method, polyurethane foam offers longer-lasting results and is suitable for a wider range of applications due to its lightweight and moisture-resistant properties.

Whether your driveway is sinking, your walkway is uneven, or you’ve got sunken patio slabs, concrete lifting could be the perfect solution. It’s fast, affordable, and highly effective. Reach out to a trusted Sherwood Park concrete contractor to assess your project and get things level again without the high cost of a full replacement.

Concrete Lifting FAQs

1. What is concrete lifting?

As mentioned, concrete lifting (also called slabjacking or foam jacking) is a repair method used to lift sunken or uneven concrete. Contractors drill small holes into the slab and inject a high-density polyurethane foam beneath it. The foam expands, fills voids, and lifts the slab back to a level position.

2. Why does concrete sink or crack in the first place?

In Alberta, including Sherwood Park, concrete issues often stem from shifting soils, freeze-thaw cycles, poor drainage, or improper compaction during installation. Over time, these factors create voids beneath the concrete, leading to sinking, cracking, or uneven surfaces.

3. Is concrete lifting better than replacing concrete?

In many cases, yes. Lifting is faster, less invasive, and significantly more affordable than tearing out and replacing concrete. Plus, it can extend the life of your driveway, sidewalk, patio, or garage floor without the mess or downtime.

4. How long does the repair process take?

Most concrete lifting jobs can be completed in a few hours or less. The foam cures within 15–30 minutes, meaning your surfaces are ready for use shortly after the work is done.

5. How long will it last?

When done properly, polyurethane foam lifting is a long-term solution. The foam is waterproof, doesn’t break down over time, and can hold up under heavy loads. Many companies offer multi-year warranties on their work.

6. Can all types of concrete be lifted?

Most exterior slabs — like driveways, sidewalks, patios, steps, garage floors, and even pool decks — can be lifted. However, extremely broken or severely damaged concrete may need replacement.

7. Will the foam affect the soil or environment?

No. Polyurethane foam is inert, eco-friendly, and won’t leach chemicals into the soil. It’s a safe option for residential and commercial use, especially compared to older methods like mudjacking.

8. What’s the difference between foam lifting and mudjacking?

Mudjacking uses a heavy cement slurry to lift concrete, while foam lifting uses lightweight polyurethane. Foam requires smaller holes, cures faster, and lasts longer — which is why it’s the preferred method for most modern contractors.

9. How much does concrete lifting cost in Sherwood Park?

Costs vary depending on the size of the job, number of slabs, and how much foam is required. On average, concrete lifting is 30–50% less expensive than replacement. Most companies offer free quotes.

10. Who should I hire for concrete lifting in Sherwood Park?

Look for experienced, well-reviewed companies that specialize in polyurethane foam lifting. RenovationFind Certified contractors are a great place to start — they’re fully vetted, licensed, and insured.

This post first appeared on https://blog.renovationfind.com

This post first appeared on https://blog.renovationfind.com