Category: Uncategorized

Asphalt roofs are a popular and affordable roofing option preferred by many homeowners. However, as with any roof option, there are a few myths and misconceptions surrounding asphalt roofs. Some myths may stop you from choosing asphalt as an option, which is why it’s important to know the truth.

Roof-Ex in Edmonton is a professional residential and commercial roofing company. They share four myths of asphalt roofs and the truth behind them:

1. Dark shingles will increase your energy costs

It’s easy to think that since dark colours attract more light, getting dark shingles will do the same. In reality, having dark shingles won’t increase your cooling expenses, even in the summer. If your home has proper attic ventilation, then any heat that does build-up will be transferred back out. If, however, your attic does not have ventilation, then heat buildup may be an issue. Ventilation is key to the efficiency of your roofing system.

2. Asphalt shingles are all the same

There’s a lot more consideration involved with asphalts shingles, than just choosing asphalt. In truth, not all asphalt shingles are the same. Asphalt shingles themselves can be made as either organic or fibreglass asphalt. Some products are much better quality than others, designed to pass the test of time.

Design-wise too, you have the option to choose between 3-tab, architectural or luxury asphalt shingles. With that in mind, there are a lot of curb appeal and customization potentials in mind! Need help deciding? Look at this guide to help you choose asphalt shingles for your roof.

3. Once your shingles are on the roof, you can’t repair them

The right sealant will do its job and seal the shingles together, but that doesn’t mean you can’t separate them later. Sealed shingles can be separated by using a flat bar to remove the bond. That way, you can still do any repairs as needed, without the cost of an entire roof replacement. Just be sure to do it on a cooler day, as it will be easier. Also, make sure that you leave any repairs to a professional. DIY roofing can be dangerous unless you have experience and the right tools.

4. Asphalt shingles are made entirely from asphalt

Contrary to its name, asphalt shingles are not entirely made up of asphalt. Rather, there is a difference in the amount of asphalt involved in each type of shingle. It is still a key part of the shingles, but there are a few more layers and materials involved. Depending on whether you choose organic or fibreglass asphalt, the materials will differ.

Organic shingles have a base mat made of either wood fibre or paper waste. This is then saturated in asphalt to give it its waterproof quality. Fibreglass, on the other hand, have their base mat made up of glass fibre. The mat is coated with asphalt to also make it waterproof, but it also means it has less asphalt than organic.

Roofers in Edmonton

Roof-Ex is a family business with over 25 years of roofing experience. They guarantee that each of their customers gets the best roofing experience and quality, every time. They offer both residential and commercial roofing installation and minor leak repairs. So whatever your home needs, Roof-Ex can provide it!

Contact Roof-Ex today for a free estimate on your new roof!

This post first appeared on https://blog.renovationfind.com

Likely, when you think of shake siding, it brings to mind either cedar shakes or fiber cement shakes. If you need to update your siding, shake sidings are a great option. They also will add both charm and major curb appeal to your home. But with both being so popular and beneficial in their own way, how do you know which one is right?

Prism Exteriors Reno’s and Contracting Ltd. in Calgary are a siding company that offers every type of siding. They share the differences between cedar and fiber cement shakes to help you choose:

Appearance and curb appeal

From a pure aesthetic and curb appeal view, both fiber cement and cedar shakes will add a sense of natural beauty. Shake siding in general lends a certain charm to any home’s exterior. The style is specifically ideal for homes with cottage or bungalow architectures, but any home can benefit from shakes.

Cedar shakes naturally offer the look, feel and smell of real wood to your home. For that reason alone, they are a popular choice for that curb appeal boost. They also provide high noise reduction and great insulation for better energy efficiency. While fiber cement is manufactured, it can still offer the look of real wood. Thanks to its wide range of colours and textures, it can also easily replicate any wood look. Need some ideas with all the colour options available? Look at these cedar shake siding homes for some help. 

Durability and maintenance

When you invest in new siding, the last thing you want is to have to replace it again in just a few short years. Cedar and fiber cement siding though, are both extremely durable options with lifespans of easily 25+ years. That being said, the main difference with reaching that lifespan is the maintenance involved.

Fiber cement shakes are naturally insect, moisture and fire-resistant. It also resists rotting and warping, won’t attract woodpeckers, and can withstand extreme weather. Aside from a soapy wash now and then to maintain its appearance, fiber cement is extremely low-maintenance. Eventually, fiber cement will need to be repainted to maintain its colour, but not for several years.

Cedar shakes, on the other hand, require much more maintenance, as it is made from real wood. Still, unlike other woods, cedar is better at naturally resisting rot and pests. Cedar shakes will also need cleaning to remove any moss or algae growth; just never pressure wash cedar shakes. This can cause unwanted damage and risks water getting underneath the shakes.

Over time, the wood will naturally fade to a weathered silvery grey. This is popular for some homeowners who like the look but if not, new paint or stain will return their colour. Paints and stains will also need to be stripped and reapplied every 5-7 years.

Cost and installation

From a cost perspective, both fiber cement and cedar shakes are amongst the more expensive options. Fiber cement will cost $3 to 4$ per square foot, while cedar shakes costs $5 to $7 per square foot. As with any siding installation, it is recommended to hire professionals to handle the job. Fiber cement is a heavy material and if mishandled can easily be damaged. Shake installation as well takes time and experience to ensure they are securely and properly installed.

Siding Contractors in Calgary

Prism Exteriors is a family-run business with years of experience and quality work behind them. They pride themselves on providing their customers with their exact visions to ensure absolute satisfaction. Prism Exteriors offers both custom work and custom materials, including all siding options, to guarantee their customers’ needs are met.

Contact Prism Exteriors for all your siding needs!

This post first appeared on https://blog.renovationfind.com

This post first appeared on https://www.homebuilding.co.uk

This post first appeared on https://www.homebuilding.co.uk

It’s easy to blow a fuse on a normal day. But during the holidays, when you have double the amount of lights plugged in, it can be even easier. If you find that you keep blowing a fuse with your holiday decorations, you might want to call an electrical handyman to help identify the problem. But before you do, here are a few helpful tips to try first.

4 Ways to Avoid Blowing a Fuse Over the Holidays

Make sure you’re using the right extension cord 

If you’re using an indoor extension cord in an outdoor setting or vice versa, you might be prone to blown fuses. Indoor extension cords aren’t equipped to handle outdoor lighting. You don’t want too many things plugged into the extension cord either.  You can also get a smart cord that will alert you when you’re plugging in too much. 

Be mindful of where you’re plugging in your decorations

Oftentimes, if you’re trying to plug all of your decorations into one outlet or one area of your house, you’re going to blow a fuse at some point. An electrical handyman would tell you to spread out your lights throughout the home to prevent overloading a circuit and blowing a fuse. 

Consider updating your lights or decorations

Different types of lights require different amounts of electricity. If you find yourself constantly blowing a fuse with your holiday lights, consider upgrading to  LED lights which use less energy and are less prone to breaking your lights. In general, you’ll want to make sure that all of your decorations are in good shape and aren’t worn down in anyway. 

Have your electrical system checked

If you live in an older home with faulty wiring, or haven’t had your electricity looked at in the last 5 to 10 years, call an expert to make sure your decorations won’t overload the system. An electrical handyman can help you identify any potential problem areas before they become a hazard.

What else can help? 

Light timers are a great way to regulate your total circuit usage this holiday season. Additionally, limiting what you plug in or have turned on at once might help you avoid blowing a breaker. If you find that you’re constantly blowing a fuse or losing power outside of the holiday season, talk with an electrical handyman to figure out what could be the cause.

The post How to Avoid Tripping the Circuit Breaker This Holiday appeared first on Handyman Connection.

As the holiday season approaches, many homeowners are thinking of the best ways to decorate and save money at the same time. But if you’re torn between the extensive light display of your dreams and cutting down your electric bill, you don’t have to be – that’s where a timer comes in. 

Not only will your lights turn on and off without you worrying about it, but you’ll keep your home safe and lower your chances of accidental fires. 

Should I use a timer for indoor or outdoor lights? 

The short answer: both. 

All of your holiday decorations, outdoor and indoor, can benefit from having a timer. If possible though, you should consider having any hard-to-reach decorations on a timer. 

There are several types of timers that you can use for the holidays. Some timers are smart phone capable, allowing you to turn your lights on and off from your phone. Plug-in timers and other mechanical timers allow you to set it and forget it, and will turn your decorations on and off at a set time each day without you worrying about it. 

What sort of timer should I get for holiday lights? 

Generally, plug-in timers are the best option when it comes to seasonal decor. Here are a few popular timer options to consider this year: 

Digital timers are easy to program, as they display your timing options on a small screen. Important to note: unless you choose a digital timer with battery backup, you may have to reset your timer if you unplug the timer or lose power in the outlet it’s plugged into.

Mechanical timers, which look a little like kitchen timers with plugs, are a simple crank-to-set option that tend to be a little less expensive than digital timers. Like digital timers, it’s best to choose a mechanical timer with battery backup in case of power outages or accidental unpluggings. 

Photocell timers can tell daytime from nighttime and are especially useful for outdoor lighting. Most have a variety of different settings, so you can keep your lights on for specific time intervals or from dusk to dawn.

Programmable smart outlets are a more permanent option, but depending on your year-round light usage, they may be a good choice for areas where you need regular light timing. These switches are designed to completely replace your normal outlet, and can connect to an app on your phone or computer, allowing you to control power to the outlet no matter where you are. And, once the holidays are over, you’ll still find your smart outlet useful throughout the year. For example, if you know you’ll be returning home late after a Fourth of July party, you can set your outlet to turn the light on for you before you get home. 

Smart outlets are great to have, but if you’re not sure how to install them, ask an electrical handyman to help.

How many lights can I plug into one timer?

That depends – but when in doubt, don’t overdo it. If you’re struggling to find enough outlets for your holiday light collection this year, an electrical handyman can help install a few more to keep your home safe, merry and bright all season long. 

Which timer is right for my home? 

The timer you choose is going to depend a lot on what decorations you’re putting up and the level of convenience you’re looking for. Regardless, if you’re worried about lighting and home safety this December, an electrical handyman from Handyman Connection can help you get ready for the holidays. 

The post What Kind of Timer is Right for Your Holiday Lights? appeared first on Handyman Connection.

If you’re living in or have recently purchased an older home, you might notice that some of the electric isn’t up to standard. If you’re constantly blowing fuses or are starting to see cracks in your outlets, it might be time to consider rewiring your home. 

Rewiring your home can make your home safer and run more efficiently. In a lot of cases, it’s a necessity. Unfortunately, due to how intense rewiring houses can be, it can also be pretty expensive. The actual cost of rewiring a house varies, so reach out to an electrical handyman to get an exact cost estimate. 

When is it necessary to rewire a house?

Generally, there’s a few signs that let you know when rewiring your house is necessary. The signs are: 

• Constantly blowing fuses or tripping circuit breakers
• A burning smell or sizzling sound that’s persistent
• Charred, cracked, or faded outlets and switches

You’ll also want to look into rewiring your home if it’s more than 50 years old. Even if you’re not experiencing issues this extreme, you should have an electrical handyman take a look at your electricity every 5 to 10 years or so.

What will it cost to rewire my house? 

Complete Electrical Biz estimates the cost of rewiring a small house to run between $1,500 to $3,500. If your home is larger and the wires are hard to access, the wiring could be more expensive – up to $10,000 or more. 

Ultimately, it really depends on the size and age of your home, as well as if you’re adding on any additional wiring. The cost also depends on how you’re rewiring your home. For example, if you’re tearing out walls to tear out old wiring and then putting up new drywall, it’s going to cost more. 

There are a lot of other factors that can impact the cost of rewiring your home. The good news is, most people only need to rewire their homes once, and you likely won’t have to rewire it for another ten or more years. 

Need an Estimate? Connect With a Local Electrical Handyman Today

Whether your home needs a full rewiring or you just want an experienced professional to check out an electrical issue, call Handyman Connection today. We’ll connect you with a local electrical handyman in your area who can help.

The post How to Know When It’s Time to Rewire Your Home appeared first on Handyman Connection.

You want to keep your home safe even when you’re not there. Self-installed home security products like front door monitors, security cameras and even alarm systems are becoming increasingly popular – so what products are right for your home?

3 Home Security Products & How to Choose the Right One

There’s a plethora of products to choose from when it comes to home security. A local electrical handyman can let you know the best products for your home based on independent needs and how your home is set up. Generally, here are some things you might consider:

Cameras

Cameras are probably one of the first home security products that people think of. For good reason too. There are a lot of camera options to pick from, but in today’s digital world, look for mobile monitoring so you’re able to watch from your phone while you’re on the go. It’s an easy way to keep tabs on what’s going on and it can put your mind at ease.

Alarm Systems

If you’re seriously investing in home security, you’ll want to consider some sort of alarm system. There are systems that you can buy and install yourself with the help of an electrical handyman. Even without a monitoring service, alarms are another layer to help deter intruders.

Smart Home Devices

Depending on the home security system you use, this might come included. However, implementing smart home features on your own to control the lights and lock doors can be the first step to being in control of your home.

What are the benefits of battery-operated vs. wired security systems?

Some home security devices, like the Ring Peephole Cam and Simplisafe, are powered by rechargeable batteries. Others, like the Google Nest Hello or Honeywell VISTA-20P, are connected to your home’s electrical system. But which is better? There are good arguments for either side of the debate, but here are a few pros for each:

Benefits of Battery-Operated Home Security

• Easy to Install: Most battery-operated home security installations involve just a few adhesive strips and a steady hand.
• Affordable: Most battery-operated wireless systems are less costly than their wired counterparts.
• Flexible and Movable: In many cases, you can take your battery-operated home security system with you when you move.

Benefits of Wired Home Security

• Consistent Surveillance: Unlike most battery-operated cameras, which activate only when they detect motion in order to conserve energy, wired systems can offer 24/7 monitoring.
• No Battery Charging: If you don’t want to add ‘changing the security batteries’ to you regular to-dos, a wired system might be the right choice for you.
• Hacker Proof: Having devices wired to your electrical and landline system makes it much, much more difficult for hackers to infiltrate your home’s security.

Whether you prefer the convenience of the battery-operated systems, or the security of a wired system, a local electrical handyman can help you place and install the security products that are right for your home.

Still Confused? We Can Help

Regardless of what kind of security system you’re looking for, Handyman Connection can help. We’ll connect you to a professional electrical handyman in your area who can install it quickly and expertly so your family is always protected.

The post Best Products for Home Security: Things to Consider appeared first on Handyman Connection.

Windows can be more than a simple light source or a portal to the outside. Choosing the right window invites creativity, style, and even value to your home. Custom windows, in particular, are a great way to add just that, but even better are floor-to-ceiling windows!

Northern Windows and Doors Inc. in Edmonton sell high-quality windows and doors and include professional installation. They share some benefits and design ideas for your new floor-to-ceiling windows:

Welcome in lots of healthy natural light 

It’s no secret that natural sunlight provides a big health boost, both mentally and physically. Many medical studies have found that exposure to sunlight helps improve moods, feel calmer and more focused. Sunlight is also what triggers the brain to release serotonin, the chemical that makes you feel happy. So by adding floor-to-ceiling windows, you’ll be letting a healthy flood of sunlight in easily! Plus, lots of sunlight during the winter months will help keep away those seasonal blues. 

Add a sense of spaciousness 

If you want to give a smaller room a bigger sense of height and space, then floor-to-ceiling windows can do just that. The windows themselves create the illusion of height by drawing the eye upwards. It’s a perfect way to transform a small room, without actually renovating the walls to expand the room. Likewise, these windows can work for an already large room. Instead of having just a room with four large walls, and possibly too much space, a large window creates a focal point. The window will provide a sense of grandness to the room that will help balance the height and fill the space. 

Customizable materials and design 

As with any custom windows, you can pick and choose exactly what will fit your needs and your wants. The size of the window can be made to fit any opening in your home, given the right support. If you want a window wall, for example, then the size and customization will be made to fit the space. You can also choose exactly what materials you want, depending on whether you want low-maintenance, budget-friendly or more customization. 

There’s also a choice about glass performance, from Low-E, thick glass or energy efficient. Then, of course, there are different window finishes, frames, and colours. It may seem like a lot, but when you know exactly what you want, a custom window lets you get just that. If you need some ideas, check out these floor-to-ceiling windows for inspiration. 

Passive heating means lower bills

Passive heating means using a natural source of heat as a way of warming yourself or a room up. If you have enough passing heating, it’s a great way to save a little on those monthly heating bills. Especially during the colder winter months. Luckily, floor-to-ceiling windows are all about passive heating. By letting in lots of sunlight, it also allows in lots of heat. So next time you’re bundled up on the couch enjoying your window view, you won’t find yourself reaching for the thermostat.

On the other hand, passive heating during the summer isn’t always ideal. Luckily, the current trend for floor-to-ceiling windows is to add curtains. Curtains are great for both design and additional décor, as well as being practical. Leave them open during the day for some added elegance and to enjoy the view and closed at night for privacy!

Windows in Edmonton and Doors in Edmonton 

With 20 years of experience, Northern Windows and Doors guarantee peace of mind when they fix your windows or doors. They provide only the highest quality of service and care in order to ensure their customers only get the best. They offer installations, replacements, and support for finding the right window or door for your home.

Contact Northern Windows and Doors today and get a free estimate! 

This post first appeared on https://blog.renovationfind.com

This post first appeared on https://www.homebuilding.co.uk