How to change bathroom pull cord

How to change bathroom pull cord

Commonly seen in bathrooms, pull cord switches are mechanisms used to turn lights on and off while preventing accidental electrocution. The long string cord allows wet hands to operate the mechanism without the hazard of the water reaching the circuit. While these switches are convenient, they can be harder to replace since they are often suspended from the ceiling.

Before attempting to fit a new pull light, it is important that you familiarise yourself with the risks. As the light is directly above you, you’ll need to be comfortable using a tall ladder. More notably, you’ll need to be comfortable with circuits.

light pull cord

Why do it yourself when you could get an expert electrician in London to do it for you? Electricity can be dangerous, especially when you don’t really know what you’re doing. The Handy Squad’s team of skilled electricians have been working with circuits for over ten years and are able to change a light in no time at all. Our team operate across London, so if you ever need an electrician in Chelsea, Mortlake electrician or an electrician Soho, you know who to call.

While we highly recommend hiring a professional electrician to help with any electrical work, here is our guide on how to change a bathroom light pull cord.

Turn off your mains electricity

Before you go anywhere near your light switch, start by turning off your electricity. If you can’t locate the specific circuit breaker, turn off all the electricity in your house. While you may have to be in the dark for a short while, it’s a lot better than accidentally electrocuting yourself. It is also recommended to test that the circuit isn’t live before you start working on it.

electricity mains

Remove the cover

Look at the cover and determine what model of switch you have. If there are screws, unscrew them to remove the cap. If it’s a twist cover, firmly grip onto the cover and twist anticlockwise to release it.

Top tip: take a photo of the wires for later reference.

Unscrew the wires and base unit

Using a flathead screwdriver, undo the screws holding the wires in place and remove the wires. Make sure you don’t loosen the screws too much or they may fall out. Now, use a screwdriver to unscrew the base unit.

change light

Need a helping hand? Speak with our friendly team today at 0800-0-12-12-12 and we’ll send a handyman straight to your door. Alternatively, you can fill out our booking form.

Install your new switch

Undo the screws on your new switch and feed the wires through the base. Then, screw the base to the ceiling. Using the reference photo from earlier, reconnect the wires and tighten the screws that hold them back in place. If there is an earth wire, make sure you place a sleeve on it, then connect it to the base plate.

Are you renovating your bathroom? The Handy Squad can help! Our team of experts are able to hang bathroom mirrors, box in bathroom pipes and regrout bathroom tiles in no time, while you sit back and relax knowing that your bathroom is in good hands. Get in touch with our team today on 0800-0-12-12-12 or fill out our booking form to find out more.

 

 

Disclaimer

At the Handy Squad, we strongly advise that you always take safety precautions into consideration when undertaking a DIY project. We also strongly suggest that you closely read and follow the instructions, that are provided by the manufacturer, of any building materials, products or tools you use for your projects.

Our aim is to provide you with clear and correct instructions, so that you can easily complete any DIY project you desire. However, please note that the information we provide should only be used as a guideline and that some information within the text may not be entirely accurate.

When using our articles for information and advice, please note that it is your own responsibility to determine whether you are capable of undertaking and executing the task you wish to complete.

Before starting a DIY task, it is essential that you inform yourself of any existing building, gas, water and electrical works regulations. If you were to have any further concerns, we recommend that you complete additional research and/or contact the necessary professional body.

We also strongly recommend that a qualified tradesperson completes the relevant safety tests and checks on any DIY work you have completed

The post How to change bathroom pull cord appeared first on Handy Squad Handyman London | Fast & Reliable London Handyman.

This website nor its owners are an actual service provider, this website is a referral service. When you place a phone call from this website, it will route you to a licensed, professional service provider that serves your area. For more information refer to our terms of service.

© LocalHandymanUSA.com

(877) 959-3534