A furnace works quietly in the background until the day it doesn’t. When an older unit starts short-cycling, running up your gas bill, or struggling to keep the house warm on a damp February morning, replacement usually makes more sense than one more repair. A new high-efficiency furnace warms your home more evenly, runs quieter, and can noticeably lower what you spend on heating each winter.
Getting there depends on hiring the right company. A good furnace installer sizes the equipment to your home, handles the gas and venting work safely, pulls the proper Metro Vancouver permits, and leaves you with a system that runs the way it should for years. To make that search easier, we’ve pulled together five Vancouver companies homeowners here trust for furnace replacement.
In no particular order, here is a list of the best Vancouver furnace replacement companies:
Canadian Care Heating Services has been looking after furnaces across Vancouver and the Lower Mainland for more than two decades, and that experience shows up in the details. They handle full furnace replacements from the first in-home assessment through sizing, installation, and the final safety check, so you’re not left coordinating pieces yourself. Homeowners often mention how the team walks them through their options rather than pushing the most expensive unit. With an A+ rating and BBB accreditation held since 2014, they’re a steady, well-established choice for a big-ticket heating decision.
Key Services & Features
– High-efficiency gas furnace replacement and installation
– Furnace repair, maintenance, and tune-ups
– Boiler and radiant heating service
– Air conditioning and heat pump installation
– Indoor air quality and ventilation upgrades
– Serving Vancouver and the Lower Mainland
Customer Feedback
Overall my experience was very good! They adapted to my particular situation and installed a new gas furnace.
– Kathy, Google
Oceanside Mechanical is a Coquitlam-based, RenovationFind Certified company with an A rating and a strong background in home heating systems. Their real strength is mechanical heating work, boilers and hydronic systems in particular, which makes them worth a call if your replacement involves anything beyond a standard forced-air furnace. The team is known for tidy, well-planned installations and clear communication from quote to finish. If your heating setup is a little more involved than the average home, their depth on the mechanical side is a genuine advantage.
Key Services & Features
– Home heating system installation and replacement
– Boiler and hydronic (radiant) heating
– Hot water tank installation
– Gas fitting and mechanical work
– RenovationFind Certified, A rating
– Serving Coquitlam and the Greater Vancouver area
Customer Feedback
They are quick, clean, and efficient. They are also courteous and knowledgeable in the approach to their work.
– M.J., RenovationFind
3. GreenTech HVAC
Based in North Vancouver, GreenTech HVAC covers furnace replacement and installation across the Greater Vancouver area, including the North Shore and West Vancouver. Their gas work is handled by a licensed Class B gas fitter, which matters when you’re swapping out a furnace and want the venting and connections done to code. Customers tend to point to their upfront quoting, where the price they hear is the price they pay. If you like knowing the numbers before the work starts, they’re an easy company to deal with.
Key Services & Features
– Complete furnace replacement and new installation
– Furnace repair and seasonal maintenance
– Air conditioning and heat pump systems
– Licensed gas fitting and venting
– Upfront, quote-first pricing
– Serving Vancouver, North Vancouver, and West Vancouver
Customer Feedback
Their service is excellent and they were bang on with their quote. I highly recommend them.
– Richard Flynn, Google
4. DirectBuy Furnace Ltd
As the name suggests, furnaces are DirectBuy’s bread and butter. Working out of Port Coquitlam and serving homeowners across Vancouver and the Lower Mainland, they focus on furnace, heat pump, and water heater replacement, so you’re dealing with a team that installs this equipment day in and day out. Reviewers regularly call out the installers by name for being clean, punctual, and respectful of the home. For a straightforward furnace swap, that kind of specialization is a real plus.
Key Services & Features
– Furnace replacement and new installation
– Heat pump and air conditioning installation
– Hot water tank and tankless replacement
– Boiler installation and service
– Same-day quotes
– Serving Port Coquitlam, Vancouver, and the Lower Mainland
Customer Feedback
Very professional, polite, detail-oriented and provided great communication.
– Sarah MacLean, Google
What Services Do Vancouver Furnace Replacement Contractors Offer?
A furnace replacement is rarely just swapping one box for another. Here’s what most Vancouver furnace companies handle as part of the job:
– In-home assessment and heat-load calculation to size the furnace to your home
– Removal and disposal of your old furnace
– Supply and installation of a new high-efficiency gas furnace
– Gas line connection, upgrades, and safe venting
– Ductwork inspection, sealing, and minor modifications
– Thermostat replacement or smart thermostat setup
– Metro Vancouver permits and post-install safety inspection
– Help applying for CleanBC and utility rebates
– Optional add-ons like air conditioning, heat pumps, or air quality upgrades
– Ongoing maintenance plans and warranty service
Local knowledge counts for a lot here. Vancouver’s mild but wet coastal climate is easy on a furnace compared with the Prairies, but a lot of the housing stock is older, with existing ductwork and gas lines that need a careful eye during a swap. Metro Vancouver also has its own permit and inspection requirements, and BC’s push toward high-efficiency and electric heating means there are rebates on the table that a contractor who works here every day will know how to help you claim.
How Much Does Furnace Replacement Cost in Vancouver?
Most Vancouver homeowners spend somewhere between $3,000 and $8,000 to replace a furnace, with the final number depending on the efficiency and size of the unit, how much venting or gas work is involved, and the condition of your existing setup. Here’s a realistic breakdown for 2026:
| Project |
Typical Cost Range |
| Mid-efficiency furnace (80% AFUE), installed |
$3,000 – $5,000 |
| High-efficiency furnace (95%+ AFUE), installed |
$5,000 – $8,000 |
| Premium or modulating system for a larger home, installed |
$8,000 – $10,500+ |
| Labour and installation only |
$1,000 – $2,800 |
| New venting or gas line work |
$400 – $1,200 |
| Metro Vancouver permit and inspection |
$150 – $300 |
| Old furnace removal and disposal |
Often included – confirm in quote |
Furnaces are usually quoted as a single installed price rather than by the hour, so the number you’re comparing already folds in equipment, labour, and often removal of the old unit. What moves the price most is efficiency rating, the size of furnace your home needs, and any extra venting, ductwork, or gas upgrades the installer runs into. Labour in the Vancouver area also runs higher than the national average, so it pays to collect at least three itemized quotes and make sure each one spells out the equipment model, warranty, permit, and what’s included, so you’re comparing like for like.
How to Hire a Furnace Replacement Contractor in Vancouver
1. Define the job. Note the age of your current furnace, any problems you’ve had, and whether you want to add air conditioning or a heat pump while the system is open.
2. Check licensing and insurance. Furnace work involves gas, so confirm the company holds a valid BC gas fitting licence, carries liability insurance, and has WorkSafeBC coverage.
3. Get at least three itemized quotes. Compare the furnace model, efficiency rating, warranty, permit, and installation details, not just the bottom-line price.
4. Ask for a proper sizing calculation. A good installer measures your home’s heat load rather than just matching whatever size was there before.
5. Review past work and reputation. Look at recent reviews and, where possible, third-party verification like RenovationFind certification.
6. Get everything in writing. A clear contract should list the equipment, price, timeline, permit, warranty terms, and what happens if something goes wrong.
Questions to Ask Before Hiring
Are you licensed for gas work and covered by insurance and WorkSafeBC?
Furnace replacement means working with natural gas and venting, so this is non-negotiable. A trustworthy company will answer without hesitation and be able to show proof. If they dodge the question or seem vague, keep looking.
How will you size the furnace for my home?
The right answer involves a heat-load calculation based on your home’s square footage, insulation, windows, and layout, not just replacing your old unit with the same size. An oversized furnace short-cycles and wears out faster, while an undersized one struggles to keep up.
What’s included in the quote, and what could add to it?
A clear installer will tell you exactly what the price covers, including permit, removal, and warranty, and flag anything that might add cost, like new venting or ductwork changes. This is how you avoid surprises on the final invoice.
What warranty comes with the furnace and the installation?
There are usually two warranties: the manufacturer’s coverage on the equipment and the company’s own coverage on the labour. A good answer explains both clearly and how long each lasts, so you know who to call if something needs attention down the road.
Can you help with CleanBC or utility rebates?
High-efficiency furnaces and heat pumps may qualify for rebates in BC, and a company that installs here regularly will know which ones apply and how to file the paperwork. It’s a sign they’re current on local programs and can save you real money.
Frequently Asked Questions
How long does a furnace last in Vancouver?
A well-maintained gas furnace typically lasts 15 to 20 years. Vancouver’s mild climate can be gentle on heating equipment, but once a furnace passes the 15-year mark and starts needing frequent repairs, replacing it is usually the smarter long-term choice.
How long does it take to replace a furnace?
Most standard furnace replacements are completed in one day, often within four to eight hours. Jobs that involve new ductwork, venting changes, or a switch to a different type of system can take longer, and your installer should give you a clear timeline in the quote.
Should I repair or replace my furnace?
As a rule of thumb, if your furnace is more than 15 years old, needs a repair costing over half the price of a new unit, or is driving up your energy bills, replacement is usually the better value. A newer, more efficient unit and a fresh warranty often save more than one more repair on an aging system.
Do I need a permit to replace a furnace in Vancouver?
Yes. Furnace replacement in Metro Vancouver requires a permit and a safety inspection, and a reputable installer will handle the permit as part of the job. Skipping it can create problems with insurance and when you eventually sell your home.
What size furnace do I need for my home?
The right size depends on your home’s square footage, insulation, windows, and layout, which is why a proper heat-load calculation matters. A furnace that’s too big or too small will run inefficiently, so let the installer measure rather than guessing based on the old unit.
Are there rebates for a new furnace in BC?
High-efficiency furnaces and heat pumps can qualify for rebates through CleanBC and local utilities, though the exact programs and amounts change over time. A local furnace company can tell you what’s currently available and help you apply.
Choosing a contractor for your furnace replacement in Vancouver
A new furnace is one of the bigger investments you’ll make in your home, and it’s the kind of work where quality really matters. Because the job involves natural gas, venting, and electrical connections, hiring a reputable, properly licensed company isn’t just about a comfortable house, it’s about a safe one. Taking the time to vet the company before you sign is well worth it.
That’s exactly where RenovationFind certification helps. To become RenovationFind Certified, a company passes financial and credit background checks, and shows proof of business licensing, insurance, and WCB coverage. They’re also monitored on an ongoing basis by a third party for any complaints, so certification reflects how a company operates today, not just the day they signed up. It’s a straightforward way to feel confident about who you’re letting into your home.
When you’re ready to compare qualified furnace companies in Vancouver, Post your Project and connect with verified pros in your area.
RenovationFind Certified is a symbol of integrity held by only the most trustworthy companies in home improvement, service, maintenance. It increases consumer confidence in your business, giving you an edge over your competition while validating you as the best.
More than an online directory, RenovationFind is Canada’s fastest growing marketing platform for promoting and connecting the best trades, service, and home improvement companies to homeowners.
This post first appeared on https://blog.renovationfind.com